surface gauge

1. Heating Rollers are made of special silicon, perfect hardness, assure film surface. industrial diaphragm pressure gauge
   ·压膜辊由特殊硅胶做成，适中硬度，压膜板面均匀牢固。工业用膜片式压力表
2. Z. Surface Gauge, for indicating items parallel to base of machine.
   表面规，用来测量被测样品与仪器基台的平行度。
3. BLUING/ BLUE UP: Process of using blue dye to coat a surface of a master, gauge, or piece of product to check a flat, circular, or tapered surface.
   着色检查：使用蓝色染料涂在模具，量规或者产品表面以检查平面、圆面或者锥面的工序。
4. The surface residual stress of tube and bar after drawing straightening and annealing, under different processing conditions, were measured by means of resistance strain gauge.
   用电阻应变片法测试了管棒材拉拔、矫直和退火过程中产品表面残余应力，研究了管棒材残余应力随工艺参数变化的规律。
5. Development of remote-control nuclear surface moisture-density gauge
   遥读遥测式表层型核子水分-密度仪
6. The well testing instrument has been developed from original surface direct-reading electronic pressure gauge to current storage high accuracy electronic pressure gauge. This change has reduced the testing personnel ′ s workload.
   测试仪器从最初的选用地面直读式电子压力计测试发展到目前井下储存式高精度电子压力计测试，这一改变大大减轻了测试人员负荷。
7. Surface runoff was measured by an automatic gauge and a thin triangle weir vertically installed at the outlet of the watershed. The relationships among preferential flow, infiltrated flow and surface runoff were analyzed.
   在小流域出口处设置90°薄壁三角堰和水位计记录了地表径流过程，分析了优先流和渗流、地表径流之间的关系。
8. Study on the Oxidation Behavior of MoS_2 Surface& I. Study on the Surface Oxidization Behavior of MoS_2 with Different Chemical Gauge Rate
   二硫化钼表面氧化行为的研究&Ⅰ.不同化学计量比MoS2表面氧化行为的研究
9. Based on the integration of author s practical experience in many years and his accumulated information, the paper introduced the technique methods of coating single composition protection adhesion on surface of the strain gauge and of filling two composition adhesion agent in the strain hole.
   本文综合作者多年的实践经验与资料积累，详细介绍了应变片表面涂覆单组分保护面胶和应变孔灌封双组分胶粘剂的工艺方法。
10. Field Applications of Surface Nuclear Moisture-Density Gauge and Measuring Comparison
    表面型核子水分&密度计现场使用和对比测试
11. Through measuring cylindrical section and surface of gauge block, this system is viable to measure free-form surface and high-reflective metallic surface.
    对圆柱正截面和量块表面的测量试验验证了该测量系统对自由曲面和金属强反射表面测量的可行性。
12. When calibrating standard leaks by constant volume method, the testing chamber surface adsorption and vacuum gauge pumping may cause extra errors up-( 30%-40%).
    定容法标准漏孔校准中器壁吸气及规管抽气会产生-（30%~40%）误差。
13. After 1,2,4,8 weeks, the variety of strain value on the surface of inferior alveolar bone at implanted area was measured by strain gauge in vivo.
    植入后1,2,4,8周，活体测量在植入种植材料区域颌骨表面的应变变化。
14. Application of Surface Direct-Reading Electronic Pressure Gauge to Heavy Oil Thermal Recovery
    地面直读式电子压力计在稠油热采中的应用
15. This paper describes the working principle, structure form, electronic circuit, measuring functions, calibration method of the surface nuclear moisture-density gauge, and its applications in combination with engineerings.
    本文介绍了表面型核子水分&密度计的工作原理、结构型式、电子线路、测试功能、标定方法及其在工程中的应用。
16. In order to reduce radiation on the operator, a remote-control nuclear surface moisture-density gauge is developed by improving the original nuclear surface moisture-density gauge.
    为减少放射源对仪器操作人员辐射的影响，对表层型核子水分-密度仪进行了改进，研制出遥读遥测式表层型核子水分-密度仪。
17. One end face of the cylinder is electroplated with a copper film to form a fast response copper-constantan sur-face thin-film thermocouple for the measurement of the instantaneous surface temperature of the gauge.
    其原理是在康铜基体上镀一层铜膜，从而形成一个铜－康铜表面薄膜热电偶，通过测定水平埋管表面的瞬时温度来计算出瞬态换热系数。
18. The slab surface temperature was measured by the infrared temperature measurement gauge, and measurement results were basically in accordance with the simulation result, it shows that the computer simulation software of secondary cooling in slab continuous casting is reliable.
    应用红外线测温仪对板坯表面温度进行测试，测试温度与仿真结果吻合较好，说明连铸计算机仿真软件的计算是可靠的。
19. Determination of compacting performance of vibratory roller by surface moisture/ density gauge
    用表面型核子水分-密度计测定振动压路机的压实性能
20. By means of the dual symmetry between chiral field and the pseudo-spherical surface, we are able to connect chiral field with s-G system, and express Backlund transformation, Riccati equation in the gauge invariant representations of the related properties of the same dynamical system in different frames.
    利用手征场、伪球面的对偶性质，将手征场与s-G系统联系起来，并将Backlund变换、Riccati方程等表为同一动力学系统的有关性质在不同标架中规范不变的表现。
21. Besides, the calibra tion means of the granite step gauge is worked over and its experiments are done; the impact of the manufactural error of the measuring base surface on the measurement accuracy during the granite step gauge calibration process is investigated.
    对花岗岩步距规标定方法进行了研究和实验，分析了花岗岩步距规标定过程中测量基面制造误差对测量精度的影响。
22. Using the ANSYS software to simulate the surface deformation, stress concentration and distortion phenomena when the drive shaft was subjected torsion and to provide the location guidance for pasting the strain gauge.
    利用ANSYS仿真传动轴受扭时的表面形变、应力集中及畸变现象，为应变片的粘贴位置提供指导。
23. Defined the scope of testing range as far as possible in the pure cone conic surface and setting of the cone location detection search with the same diameter as the diameter of the gauge.
    在上下锥面尽可能宽的范围内定义锥面检测范围，在锥面定位检测设定中搜索与量规直径相同直径所在的轴向位置。
24. And then open the spherical tank to check, spherical shell plate thickness and surface magnetic powder testing were carried out by ultrasonic thickness gauge from the internal sphere.
    然后对该球罐进行了开罐检查，从球罐内部用超声波测厚仪进行了球壳板的厚度测量和表面磁粉检测。

noun

1. gauge consisting of a scriber mounted on an adjustable stand

   Synonym:    surface gagescribing block